EVO X Competition Car Build Parts & Prices

EVO X COMPETITION CAR PARTS & PRICES

Prices indicated include GST and may change without notification

* Any parts purchase with a Credit Card will incur a 3% surcharge

* Motorsport Engineering and Management accept no liability for any failure of any part that may occur whether fitted by Motorsport Engineering & Management or the consumer

* No Labour charges are included and will be quoted on upon request

* All parts indicated on this list are for competition purposes only, are not suitable for street use, do not comply with Australian Design Rule Standards and do not come with any Manufacturer or Dealer Warranty.

Mitsubishi Lancer Evolution X RS $48,400.00

TMR Performance
PO Box 5166
Hallam VIC 3803

Tel: 03 8669 0230
Fax:03 8669 0238
Email: sales@tmrperformance.com.au

1. ENGINE
Exhaust System suit Tarmac M2 Rally Regs with modified cat converter.
P.O.A
Exhaust Extension Tail Pipe when Rear Muffler in not used. (Suit Show Room Class)
P.O.A
Ralliart Rear Muffler.
P.O.A
Rear Muffler, TMR Specification (Change over)
P.O.A
Complete Exhaust Turbo Back, 76mm, Race Track application
P.O.A
TMR 3″ Twin outlet S/S Cat Back exhaust system
P.O.A
Engine ECU Upgrade, 270Kw, (must use TMR Muffler or Cat Back System)
P.O.A
Engine ECU Upgrade, 247Kw, (must use TMR Muffler or Cat back System). Suit 98 Fuel
P.O.A
Engine ECU upgrade to suit Elf 102 fuel
P.O.A
TMR Programmed Motec ECU for 98 or Elf 102 Fuel suit Tarmac Rally – Requires Centre Diff Controller
P.O.A
TMR Programmed Motec M800 ECU suit Production car racing – Requires ADL Dash
P.O.A
Competition Clutch Disc (Tarmac)
P.O.A
Competition P/Plate
P.O.A
Competition Engine Mount Bushing Kit
P.O.A
Intercooler Aluminium Pipe Set (Ralliart) Pressure Side
P.O.A
Intercooler Aluminium Pipes (Ralliart) Air Suction Side
P.O.A
Long Reach Competition Spark Plug
P.O.A
Competition Thermostat
P.O.A
High Pressure Ralliart Radiator Cap
P.O.A
2. SUSPENSION
(Ohlins) Tarmac or Track Spec, Coil Over Springs with Cannister/Adj Bump/Reb
P.O.A
McRae/ Proflex Coil Over, Cannister,Bump & Rebound Adjustment. Tarmac Rally & Race.
P.O.A
Koni, Show Room Spec, Opt 2, Adj Bump, Rebound, suit Tarmac Rally & Circuit
P.O.A
Koni, Opt 1, Adj Bump/Rebound/Spring Platform, with Springs, Tarmac Rally & Circuit.
P.O.A
Koni, Opt 3, Coil Over, Fully Adjustable, with Springs, suit Tarmac Rally & Circuit.
P.O.A
Koni Show Room Spec,Opt 4, Adj Bump/Reb, non adjustable spring platforms, uprated lowered Springs.
P.O.A
Competition Suspension Bush Kit (Front)
P.O.A
Competition Suspension Bush Kit (Rear)
P.O.A
Enkie Wheel (Same as supplied with car)
P.O.A
Extended Wheel Studs with Wheel Nuts (Car Set)
P.O.A
25 Rear Anti Roll Bar
P.O.A
27mm Rear Anti Roll Bar
P.O.A
27mm Front Anti Roll Bar
P.O.A
Adjustable camber strut tops suit Ohlins suspension
P.O.A
3. BRAKES
Competition Pads Front (Suit Standard Brembo Package) Price may vary with application.
P.O.A
Competition Rear (Suit Standard Brembo Package) Price may vary with application.
P.O.A
Ferodo DS3000 suit Alcon Monoblock 6 piston caliper
P.O.A
Full Floating Brembo Disc Assembly Front. (Tarmac Rally & Road) x 2
P.O.A
Front Braided Brake Lines to suit Ohlins Suspension.
P.O.A
TMR Competition Brake Kit consisting of: 20 x bobbins, 2 x mounting hats, 2 x dog bones, 2 x studs, 2 x 12 point nuts, 2 x 355×32 72 vein discs, braided brake line set, 2 x 4 piston calipers, 20 x bolts, S/S nuts and washes
P.O.A
Aeroquipe Brake Lines Body to Caliper, Front & Rear
P.O.A
Hydraulic Handbrake & Fitting Kit
P.O.A
Front Brake Discs (Non Grooved) Replacement for Standard disc x 2
P.O.A
Front Brake Discs (Grooved) Replacement for Standard disc x 2
P.O.A
Front Brake Discs (Floating non grooved) Replacement for Standard disc x 2
P.O.A
Front Brake Cooling Scoops
P.O.A
Rear Disc (Grooved or Plain) x 2
P.O.A
4. BODY
Roll Cage, Bolt in and CAMS approved
P.O.A
FIA Approved Roll Cage, Chrome Moly Weld In (add $440 to be painted Black)
P.O.A
Chrome Moly Weld in Kit Form Roll Cage. (FIA Approved) Add $440.00 for painting.
P.O.A
Seat Mounts weld in and combined with roll cage
P.O.A
Velo Seat, FIA Approved Carbon Fibre Standard Size (each)
P.O.A
Velo Seat FIA Approved Carbon Fibre Extra Large (each)
P.O.A
Velo Seat FIA Approved Fibre Glass Standard Size (each)
P.O.A
Velo Seat FIA Approved Fibre Glass Extra Large (each)
P.O.A
Std Seat Mount position frame kit to mount comp seats x 2 suit TMR Weld in Roll Cage
P.O.A
Std Seat Mount position frame kit to mount comp seats x 2 suit Bolt in and Kit Roll Cage
P.O.A
Seat Runner (per seat)
P.O.A
Seat Mounting Brackets (per seat)
P.O.A
Seat Belts FIA Approved x 2, (6 point, 3″ Width) $550.00 Each.
P.O.A
Stilo WRC Intercom
P.O.A
Hidja Rally Comp 300
P.O.A
Radiator Support Bushing Kit
P.O.A
Paint inside (any colour)
P.O.A
Carbon Door Trims Front and Rear
P.O.A
Fibre Glass Door Trims Front & Rear
P.O.A
Rear Parcel / Firewall Panel (Fibre Glass)
P.O.A
Rear Parcel / Firewall Panel (Carbon)
P.O.A
Rear Parcel / Firewall Panel (Aluminium)
P.O.A
Fire Extinguisher 1kg x 2 required (with twin retaining clips)
P.O.A
Fire Extinguisher Hand Held 2kg
P.O.A
Lifeline 4.5kg Fire Bomb
P.O.A
Safety Triangle & Mounts
P.O.A
First Aid Kit with Seat Belt Cutter
P.O.A
Driver and Co-Driver Footrest (Carbon)
P.O.A
Driver Foot Plate with Foot Rest
P.O.A
Driver and Co-Driver Foot Plate (Aluminium)
P.O.A
Driver and Co-Driver Footrest (Fibre Glass)
P.O.A
Ralliart Gear Knob Black or White
P.O.A
Helmet Net
P.O.A
Map Light
P.O.A
Spare Wheel Retaining Bolt Assembly
P.O.A
Tow Hook Strap, Front & Rear (Red)
P.O.A
Bonnet Pins Flush Mounting
P.O.A
Bonnet Pins (Standard Type)
P.O.A
Terra Trip 202 Plus with Duel Sensor Interface
P.O.A
Terra Trip 303 Plus with Dual Sensor Interface
P.O.A
Carpeted rear fabricated aluminium bulk head panel (area where rear seat has been removed)
P.O.A
Terra Trip Wheel Probe
P.O.A
Terra Trip Wiring Kit
P.O.A
Terra Trip Wheel Probe Mounting Bracket
P.O.A
Air Bag & Seat Belt Resistor Kit
P.O.A
Sabelt 350mm x 90mm dish Steering Wheel
P.O.A
Sabelt 350mm x 65mm dish Steering Wheel
P.O.A
Steering Wheel Boss Kit
P.O.A
5. DRIVELINE
Diff Front Ralliart LSD Super Traction (Gravel & Tarmac Spec)
P.O.A
Transfer Case Service Kit with Bearings & Spacers (Required when fitting Front LSD)
P.O.A
To be used with Front Diff,1.5 or 1.3 Cone Springs x 2 @ $113.00 each.
P.O.A
Diff Rear Ralliart LSD Super Traction (Gravel & Tarmac Spec)
P.O.A
To be used with Rear Diff 2 x 1.5 Cone Springs @$113.00 each.
P.O.A
To be used with Rear Diff 2 x 1.6 plates @ $64.80 each
P.O.A
Competition Bush Kit for Diff support & Rear cross member.
P.O.A
6. ELECTRICAL
Rev Shift Light
P.O.A
SLM Shift Light Module suit Motec
P.O.A
Battery Master Switch (Manual Cable Type)
P.O.A
Ralliart Centre Diff Controller
P.O.A
Motec Centre Diff Control Unit (Reprogrammable) with program.
P.O.A
Centre Diff Switch Relocation Kit (used if steering wheel replaced)
P.O.A
Competition Battery & Hold Down Clamp
P.O.A
Motec Dash with Data Logging Ability (ADL Dash) – Requires Loom
P.O.A
ADL2 Loom suit Motec
P.O.A
7. FUEL SYSTEM
85 Litre FT3 Fuel Cell Mid Mounted with 2x Bosch HP pumps.
P.O.A
Fuel Tank to Dry Break Pluming. (Endurance Racing Only)
P.O.A
Siamese Dry Break Fittings (Endurance Racing Only)
P.O.A
Upgrade Fuel Pump (Replace standard unit)
P.O.A
Fuel Sample Fitting with Quick Release Coupling
P.O.A
Inline Fuel Filter
P.O.A
Fuel Gauge Kit suit 75litre tank
P.O.A

Leave a Reply